Clay Paky Golden Spot 1200
- Recenzii
- Pune o întrebare
Nici o postare găsită
Conectează-te ca să te putem notifica când primești un răspuns
Power supplies available
• 230V 50Hz
• 240V 50Hz
• 208V 60Hz
• 200V 50Hz
• 200V 60Hz
The projector is designed to operate at the mains frequency
and voltage given on the electrical data label on the base of
the appliance.
Input power
1700VA at 230V 50Hz (pf correction 140µF standard).
Lamp
Discharge lamp with built-in power supply unit.
• Type HMI 1200W / S
- Cap SFc 10-4
- Color temperature 6000 K
- Luminous flux 110000 lm
- Average life 750 h
- Any working position
Motors
11 stepper motors, operating with microsteps, totally micro-
processor controlled.
Optical unit
• Twin lens condenser.
• Spherical reflector with a high luminous efficiency.
Channels
10, 12 or 13 control channels.
1 - Iris
2 - Color Disc 1
3 - Color Disc 2, Prism & Frost
4 - Dimmer / Stopper / Strobe
5 - Pan
6 - Tilt
7 - Rotating Gobo Select
8 - Gobo rotation
9 - Fixed gobo select
10 - Focus
11 - Pan end
12 - Tilt end
13 - Gobo end
Inputs
• RS232 / 423
• DMX 512
Movable body
• Movement by means of two stepper motors, controlled by
microprocessor.
- Automatic repositioning of PAN and TILT after accidental
movement not controlled by control unit.
- Travel:
- PAN = 450 °
- TILT = 252 °
- Maximum speeds:
- PAN = 4.0 sec (360 °)
- TILT = 3.2 sec (252 °)
Resolution:
- PAN = 1.76 °
- PAN FINE = 0.007 °
- TILT = 0.98 °
- TILT FINE = 0.004 °
IP20 protection rating
• Protected against the entry of solid bodies larger than
12mm (0.47 ").
- No protection against the entry of liquids.
CE Marking
In conformity with the European Union Low Voltage
Directive 73/23 and Electromagnetic compatibility Directive
89/336.
Safety Devices
• Bipolar circuit breaker with thermal protection.
• Automatic break in power supply in case of overheating or
failed operation of cooling system.
- Power supply cut off automatically on opening the side
covers.
- Four fixing points for safety rope.
Cooling
Forced ventilation with axial fans.
Body
• In die-cast aluminum and steel.
• Epoxy powder painting.
• Two side handles for transportation.
• Device locking PAN and TILT mechanisms for
transportation and maintenance.
Working position
Functioning in any position.
Weights and dimensions
Weight: about 55 kg.